Constant Pressure™
Technology is built-in!
Constant pressure may not be good for people but it's great for foam pads
where you want a uniform and constant pressure on the surface being
finished. Professionals have learned through experience to keep their
machines parallel to the surface being worked on. Tilting the machine in any direction can
result in an uneven and excessive pressure being transferred to the
surface.
In our best polishing
pads, we use a layer of engineered, instant rebound foam between the pad and
the backing plate to absorb off-axis movements while keeping the pressure of
the pad on the surface constant. This is not required with these Gold
Concours Finishing Pads because the foam is actually softer than the
"instant rebound" foam used in our polishing pads! These pads automatically
absorb any off-axis motion.
| Curved edge allows
working in tight spaces and around complex curves!
The other patented, innovation incorporated in these pads are a curved
outer edge. The curvature on the outer edge of the pad allows easy
transitions over seams and inclines.
Standard pads are
flat-cut. We pay extra to have the top edge rounded over because it prevents pads from snagging
while working in tight spaces.
|
 |
|
Pads easily conform
to complex curves. |
Bottom line.
If you're finishing a show car with custom paintwork or
just want the best shine on your daily driver, use these Gold, Concours
Finishing Pads.
Available in a 6-1/2 inch diameter
by 1-1/4 inch thick and a 7-1/2 inch diameter by 1-1/4 inch thick. Both
sizes are designed to work with a six inch Hook-and-Loop Backing Plate (not
included).
Gold foam isn't just for machine
buffing. We also have Concours
Gold Foam Wax Applicators, Gold
Finger Pocket Applicators, Ultimate
Wax & Polish Applicator, and the UltiMitt
Foam Car Wash Mitts made of this same super-soft foam. |
