BLACKFIRE Wet Diamond
All Finish Paint Protection

Hand Application Tips:

• Always use on a cool surface out of direct sunlight.
• Apply a Quarter size amount of product on a dry applicator pad and wipe on the surface using small circular motions.  Allow Wet Diamond All Finish Paint Protection to dry before buffing.
• Buff haze with a clean Microfiber Buffing Cloth.

Machine Application Tips:

• Place a 6-1/2 inch, Hi-Gloss, Constant Pressure, Red Concours Finishing  Pad on a 6 inch Hook and Loop  Backing Plate  and attach to your 7424 machine polisher.
• Work on a small area, 24 to 36 inches square, out of direct sunlight.
• Apply two 6 to 8 inch lines of All Finish Paint Protection directly to the surface.
• With the machine off, spread the sealant over the surface using the dry foam pad. This coats the foam pad and the paint with sealant.  (I prefer to apply this sealant with a dry pad, without using any pad lubricant.)
• Place the Red, Concours Finishing  Pad on the paint and turn the machine on. Set the speed dial on the polisher between 3-1/2 and 4. 
• Work the pad over the surface in a back-and-forth motion and then an up-and-down motion. Apply until the sealant starts to dry. Cover one section of the vehicle at a time (i.e. the hood, a door, fender, etc.)
• Allow a haze to form. Hand buff to a brilliant shine with a Microfiber Buffing Cloth.

Package Savings: See our BLACKFIRE New Car Kit, Clay, Polish & Shine Kit and Wet-Ice over Fire Shine Kit for special savings on this and other BLACKFIRE products.

    The use of this paste wax on top of Wet Diamond All Finish Paint Protection is not required for a great, long-lasting shine. We mention it as an option for perfectionists or enthusiasts with show vehicles desiring the ultimate in depth and wetness. Midnight Sun Ivory Carnauba Paste Wax can be purchased separately, below. (It does not come with this sealant)

Here's what Wet Diamond All Finish Paint Protection looks like:

    

Click on an image for larger view. To read our customer's comments click Reflections under the image.

    Wet Diamond All Finish Paint Protection is VOC compliant in all 50 states.

    Wet Diamond All Finish Paint Protection is a pure sealant without any cleaning power. For best results, older vehicles should be pre-cleaned with BLACKFIRE Gloss Enhancing Polish or Scratch Resistant Clear Finishing Polish before first time application.

    16 fl. oz. bottle. Click the Accessories/Sizes tab at the top for larger 32 oz. and 64 oz. refills.